There are tons of 3D printers in the market. It’s your precious intention to find the best matching for your work. Otherwise, you cannot go along to get your work done. Because every part of your 3D printer has got a task to do.

The best things come late. Like that, the Anycubic i3 Mega 3D printer was introduced in 2015 to the market. There were lots of competitors in the market fighting for their places to sell their products. 

The mother company is based in Shenzhen, in the province of Guangdong, China. Though it’s a product from an Asian country, you won’t have to think that much regarding this amazing printer, as they have already set their name in the 3d printing field.

They have got 20 warehouses all around the globe and you can have their warranty all along.

A most important factor related to Anycubic i3 mega review is the perfection of everything. But, it is recommended to use this printer for non-industrial purposes.

If you get to use this printer for educational purposes, entertainment factors, or anything unrelated to business, you will be able to get better use of the 3D printer.

Another thing you need to know about the manufacturer is that, they allow you to be a member of their community and the members are granted discounts.

It is said that the Anycubic 3D printer is the best printer below $300 and here are the factors you should be aware of the 3D printer as well.

anycubic i3 mega specs

Considering the factors about the height and the width, it has average specifications when comparing with the numbers.

It has got 405mm tall by 410mm wide by 453mm deep.

The weight of the print is around 11kg. It’s a bit higher value when comparing with the printers that have less weight like 1kg.

After the installation of the 3d printer, you will not be able to move the printer without any effort. All these numbers indicate a desktop version of the printer rather than a mobile printer.

Because this printer has got a larger volume and a weight, the users will have to stick to the place where it is located. The maintenance will be easy for the device if you have proper knowledge about the 3D printer.

Otherwise, you will have to get the expertise of a professional as well. The print area for the 3d printer is around a volume of 210mm by 210mm by 205mm and it can be considered as an increased volume when minding the volumes of the printers for the same price range.

Even though you are not going to get the printer used for academic purposes, you will be able to demonstrate huge objects. The structure fits the 3D printer very well with the specification to give a proper steadiness for the printer.

Basic information

The technology used in the printer is FDM (Fused Deposition Modeling), a single extruder.

Though the 3D printer has just an extruder, you will be able to get the full use of the printer.

The resolution for the 3D printer resolves around 50 microns. If you are well aware of the resolution, you will realize that it is a great value for a printer for $299.

The layer resolution is 0.05-0.4 mm. The nozzle diameter is 0.4 mm/1.75 mm and it can give you a very quick production with the desired timeframe.

The Anycubic i3 Mega Review states that the printer has got a wide range of connections with the wi-fi. It helps you to enter data either through wi-fi or an SD card.

Since the 3D printer supports PLA, ABS, HIPS, Wood, and some latest filaments, you will be able to get the prints of various types of objects.

Though the object you are going to print is a hard one or a one with a smooth surface, this printer is very capable of having that printed because of the filament compatibility.

The heated bed answers all the questions to the compatibility. The printer requires a temperature max of 260 °C to get things going pretty nicely.

The working voltage of the printer is 12 V DC and it is a very low value for 3d printer that uses a heated bed as well.

The factors that make this printer unique

There are lots of things that help to make the printer a unique one indeed. If you have a closer look, you will realize those factors are very rare to be seen on a printer that costs $299 in the market.

The Anycubic i3 Mega Review can explain the 3D printer comes as a kit. But, it comes as a pre-assembled pack which can be set up within an hour.

The calibration and the establishment parts are not requiring more than an hour at any cost. It means that you can have the printing process going on within an hour.

The display of the 3D printer is not a typical one that has traditional features. The display omes as a touch screen where you can have the controls using the display itself. The display has a very impressive look and the readings can be taken from the far. The usage of the printer has been made easy with the touch screen.

There are lots of problems related to power failures. If you face a power failure, that will cause some troubles for the entire printing process. It has to be tolerated as a loss of time or money.

But, The Anycubic i3 Mega is very responsive to the power failure as it can resume the printing process where it was left when the power failure occurred. If you are living in a place where you have to face an unstable power line, this will be a thing that comes in handy.

Another problem you have to face when printing is the disability to see any shortage of filament. You will not have enough time to see if the filament is almost finished.

Because the only thing you have to do is not just this. But, the filament sensor will indicate that your 3d printer is running out of the filament and you need to check on that.  If you did not have enough attention on the display, that would also be fine as the sensor will pause the entire process and you will be able to continue the printing when it was stopped.

The heated bed is a blessing for you as the temperature is not going to bother you anymore. There will be plenty of materials that can be used to do the printing with this printer.

Whatever your goals are, you will be able to print the things pretty awesome with the compatibility factor. You don’t have to go around searching if the materials are compatible with your printer as most of the materials can work with your printer.

Pros

The most important thing for any item in the market is the advantages. There are two types of advantages. The advantages, that can be seen only through that item and the advantages that can be seen from any other item.

Here are some pros that can be seen on this 3d printer.

The quality of the design is perfect. If you don’t want to apply additives for the object that has been printed, that will be perfect in every way even after without the finalization.

The compatibility with most of the materials has made this 3D printer outstanding.  The documentation part is always a fun thing to do with the printer and it has got all the friendly things included that can assist you in many ways.

There are some spare parts as well. Those things may help you in a moment when you have urgent work and running out of time to find the spare parts.

The Fast and versatile printer suited for most materials helps you to get your work done according to your will.

If you are interested in designing many designs using the printer, that will be possible with this printer. The fast and friendly user interface is capable of arranging all your work without any misunderstanding. It makes you realized the simplicity of the work that you are going to do with the printer.

Cons

Here are the cons you need to be aware of when purchasing this design

You will have to stay alert about the loosen cables. It may cost extra money as well as time.

Ther is a probability to deposit the dirt under the touch screen which can cause unclear display later. The printer is not sealed to avoid the noisy environment and the noise is a bit high when the printing process is going on. The frequent calibration is required because of the instability of the printer. That might require additional attention as well. These factors cause damage to the printer as cons, but not a higher impact.

Final thoughts

Anycubic i3 Mega Review can be concluded in favor of the 3D printer as it has got some premium options like touch screen, perfection in designing, and the less assembling effort. But, you should know that some cons cause minor damage to the entire design as well.

So, the Anycubic i3 printer can be recommended for those who need a 3D printer for their regular work. But, if you need a printer for your different work for a single time frame, this will not be your choice. Because this printer requires calibration most of the time after a print. Yet, if you manage to use Anycubic i3 3D printer for the way it is recommended, this will be the best 3d printer for $299.